19" 8 Outlets 1U Rack Mount Power Strip

The Power Guard Rack Mount is designed to provide sound surge protection to your networking devices. With over 1000 Joules of surge protection and a clamping voltage of 330V (UL 1449), you can rest assured that your network is safe from dangerous power surges and spikes.

Features:
Over 1000 Joules of surge protection from 8 superior metal oxide varistors (MOVs)
330V clamping voltage (UL 1449)
RJ11 and RJ45 jacks that provide surge protection and EMI/RFI filtration for telephone and networking devices (PA-R model)
Push-button reset for circuit breaker
Two "always hot" power receptacles
Main power switch to turn IEC outlets on and off
Specially designed brackets for neatly tying up excessive cables and preventing accidental unplugging of power cord

Specification Data Sheet:
Manufacture #: PA-R
Receptacles: 2 outlets always on in front, 6 outlets power switch control on/off with 2 female IEC sockets
Rated input voltage: 100V~120VAC 50/60 Hz
Rating output current: 15 AMPS MAX
Power rating: 1800 VA
Cord length: 10 feet (3 meters)
Surge Protector energy rating: 1072 Joules (8 metal oxide varistors)
AC maximum spike capacity: 4500A (8/20 ??s)
FAX/Modem surge protector: RJ11 6P4C 19.8 Joules; pin 3 and pin 4 (PA-R)
Ethernet surge protector: RJ45 8P8C clamping voltage 6.8 Vrms, 100 ??s 300W (PA-R)
Modes protector: Line to Neutral, Line to Ground, Neutral to Ground
EMI/RFI Noise Filtration: 99% removed from 100 KHz to 1MHz
Response time: Instantaneous < 1 ns
Over load protector: Over load 200%, 4~10 SEC
Enclosure: Metal Housing 1 U size
Operating Temp.: 0??C~60??C
Storage Temp.: -10??C~60??C
Humidity: 0 to 95%(non-condensing)
Dimension: 134mm x 440mm x 44mm/Power cord 3M
Safety Approve: UL
Approx. Weight: 2.3kg (5.1 lb)